Pular para o conteúdo principal

Alterações neste passo

Edição por Ian Mitchell

Aguardando aprovação

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* black] After removing the rubber stoppers on top, there should be six exposed screws. Remove these using the T6 screwdriver.
[* black] Next, use the spudger to loosen the case underneath the shiny metal edge. Go all the way around the phone until completely loosened.
[* icon_note] The case is superglued on and will not permanently damage the phonephone when removed, but you should still use caution. Be firm, but gentle.
[* icon_note] The case is superglued on and will not permanently damage the phonephone when removed, but you should still use caution. Be firm, but gentle.
[* black] After loosening the case, remove it.
[* icon_caution] As thereThere is a wire that connects both the top and bottom of the case,case. If you are not carefulcareful when removing the case, you might snap the wire.
[* icon_caution] As thereThere is a wire that connects both the top and bottom of the case,case. If you are not carefulcareful when removing the case, you might snap the wire.