Pular para o conteúdo principal

Alterações neste passo

Edição por Mandy Pederson

Aguardando aprovação

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* black] ThereAfter removing the rubber stoppers on top, there should be six exposed screws. Remove thesethese using the T6 screwdriver.
[* black] Next, use a toolthe spudger to loosen the case. Itcase underneath the shiny metal edge. Go all the way around the phone until completely loosened.
[* icon_note] The case
is superglued onon and will not permanently damage the phone, but you should still use caution. Be firm, but gentle.
[* black] After loosening the case, remove it. Be very cautious, as
[* icon_caution] As
there is a wire that connects both the top and bottom of the case.case, If you are not careful, you might snap the wire.
[* black] ThereAfter removing the rubber stoppers on top, there should be six exposed screws. Remove thesethese using the T6 screwdriver.
[* black] Next, use a toolthe spudger to loosen the case. Itcase underneath the shiny metal edge. Go all the way around the phone until completely loosened.
[* icon_note] The case
is superglued onon and will not permanently damage the phone, but you should still use caution. Be firm, but gentle.
[* black] After loosening the case, remove it. Be very cautious, as
[* icon_caution] As
there is a wire that connects both the top and bottom of the case.case, If you are not careful, you might snap the wire.