Pular para o conteúdo principal

Alterações no passo #15

Edição por Brian

Aguardando aprovação

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* black] Use a spudger to pry the battery up from the rear panel. The battery is attached with an adhesive strip around the perimeter of the battery. To prevent the battery from bending during the removal process, we recommend against using just the plastic pull-tab .
[* icon_reminder] The iPhone's battery is attached to the rear case with a mild adhesive. This adhesive usually comes out attached to the battery. If your replacement battery already includes an adhesive backing, you're all set. If your replacement battery doesn't have an adhesive backing, you'll want to transfer the adhesive from your old battery to the new one.
[* black] It is not absolutely necessary to remove the battery to access the ribbon cables in the following steps. Step 16 should be considered optional.