Conserte seus objetos

Direito de executar reparos

Loja

Alterações no passo #6

Edição por Luke Soules —

Aguardando aprovação

Antes
Depois
Sem alteração

Linhas de Passo

[* icon_note] Some iPhone 3GsiPhones may have the connector colors reversed (black plastic tab, white connector). Make sure you're flipping up the tab properly, otherwise you may damage the connector.
[* icon_note] Some iPhone 3GsiPhones may have the connector colors reversed (black plastic tab, white connector). Make sure you're flipping up the tab properly, otherwise you may damage the connector.
[* yellow] Use a spudger to flip up the white plastic tab holding the remaining ribbon cable in place. The white tab will rotate up 90 degrees, releasing the ribbon cable.
[* black] Slide the black ribbon cable out of its connector, and remove the display assembly from the iPhone.
[* icon_note] Please note: You may find on some non-American(Chinesenon-American (Chinese, European) versions of the 3G that the flip up plastic tab does not exist. InIn this case you would slide the ribbon cable towards the screen until it is removed. When you assembly it, you would apply pressure to the ribbon to insert it back into the ribbon "socket".socket."
[* icon_note] Please note: You may find on some non-American(Chinesenon-American (Chinese, European) versions of the 3G that the flip up plastic tab does not exist. InIn this case you would slide the ribbon cable towards the screen until it is removed. When you assembly it, you would apply pressure to the ribbon to insert it back into the ribbon "socket".socket."