Pular para o conteúdo principal

Alterações no passo #6

Edição por micheljguillaume

Edição aprovada por Andrew Optimus Goldheart

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* black] UseRibbon cable "3" is held in place by an FPC style connector. '''Unlocking this connector is a must before removing the ribbon cable:''' use a plastic spudger to flip up the white plastic tab holding the remaining ribbon cable in place. The white tab will rotate up 90 degrees, releasing the ribbon cable.
[* black] UseRibbon cable "3" is held in place by an FPC style connector. '''Unlocking this connector is a must before removing the ribbon cable:''' use a plastic spudger to flip up the white plastic tab holding the remaining ribbon cable in place. The white tab will rotate up 90 degrees, releasing the ribbon cable.
[* black] Slide the black ribbon cable out of its connector, and remove the display assembly from the iPhone.