Histórico do passo nº 9 do guia Adding a Remote Page Turning Switch to the Kindle 3

Alterações no passo nº 9

Edição por Brian — 8 de nov de 2011

	[* black] Pretty much any switch will work here. I used a small enclosure by [http://www.budind.com/view/Plastic+Boxes/Hand-Held+Grabbers+Style+F\|BUD Industries] (from [http://www.mouser.com/ProductDetail/Bud-Industries/HH-3492/?qs=blOKVJfDFpANzdK6HD6Mog%3d%3d\|Mouser])
	[* black] I made 2 holes in some perf board for a couple of tact switches. They have a nice feel to them.
-	[* black] I've ordered a prototype PCB for this enclosure from [http://batchpcb.com/index.php/Home\|BatchPCB] and will make it available on their market place once I verify that it works.
+	[* black] ~~I've ordered a prototype PCB for this enclosure from [http://batchpcb.com/index.php/Home\|BatchPCB] and will make it available on their market place once I verify that it works.~~
+	[* black] Update: You can now get a [http://www.batchpcb.com/index.php/Products/65726\|PCB] for the enclosure for $4.42 There is a $10 per order set up charge from them so you might also want to order the [http://www.batchpcb.com/index.php/Products/65727\|connector PCB] at the same time.

	[* black] Pretty much any switch will work here. I used a small enclosure by [http://www.budind.com/view/Plastic+Boxes/Hand-Held+Grabbers+Style+F\|BUD Industries] (from [http://www.mouser.com/ProductDetail/Bud-Industries/HH-3492/?qs=blOKVJfDFpANzdK6HD6Mog%3d%3d\|Mouser])
	[* black] I made 2 holes in some perf board for a couple of tact switches. They have a nice feel to them.
-	[* black] I've ordered a prototype PCB for this enclosure from [http://batchpcb.com/index.php/Home\|BatchPCB] and will make it available on their market place once I verify that it works.
+	[* black] ~~I've ordered a prototype PCB for this enclosure from [http://batchpcb.com/index.php/Home\|BatchPCB] and will make it available on their market place once I verify that it works.~~
+	[* black] Update: You can now get a [http://www.batchpcb.com/index.php/Products/65726\|PCB] for the enclosure for $4.42 There is a $10 per order set up charge from them so you might also want to order the [http://www.batchpcb.com/index.php/Products/65727\|connector PCB] at the same time.