Alterações no passo nº 7
Edição por Brian —
- Antes
- Depois
- Sem alteração
Linhas do passo
| [* black] Finishing off the connector with heat shrink and hot glue. | |
| - | [* black] I first covered the hole with a piece of scotch tape with a slot cut in |
| + | [* black] I first covered the hole with a piece of scotch tape with a slot cut in it. The connector is pushed through and hot glue is applied around the connector so it conforms to the outside of the Kindle. |
| [* black] The tape prevents the glue from sticking to the Kindle and allows you to remove the connector. |