Alterações no passo nº 3
Edição por Brian —
- Antes
- Depois
- Sem alteração
Linhas do passo
| + | [* black] Here is where this guide earns it's 'Very Difficult' rating. |
|---|---|
| + | [* black] These pictures where taken with a [http://www.celestron.com/c3/product.php?CatID=81&ProdID=781|Celestron Deluxe Handheld Digital Microscope]. And that's 30AWG magnet wire. |
| + | [* black] The first picture shows the pinout on the connector. I have labeled the traces on the second one in case you want to tap them instead. It might be easier. |
| + | [* black] The third picture shows the second time I tried this mod and bridged 2 of the connector pins. I couldn't clear it up and attempting to remove the connector led to it's accidental destruction. I sure I could have gotten a replacement connector but I just folded back the flex cable onto a piece of double sided tape and soldered right to the traces. The original side switches work fine this way, but it's not quite as neat a job as I would have liked. |
Imagem 1
Nenhuma imagem anterior
Adicionado
Imagem 2
Nenhuma imagem anterior
Adicionado
Imagem 3
Nenhuma imagem anterior
Adicionado