Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Alterações no passo #4

Edição por Kevin Dennis

Edição aprovada por Kevin Dennis

Antes
Depois
Sem alteração

Linhas de Passo

[* icon_caution] Solder is very hot andThe soldering iron can destroy yourcomponents on the motherboard.
[* red] This hole indicated by red rectangle is connecting
Only touch the soldering iron to the red speaker wiresolder already on the board.
[* black] Touch the tip of yourthe soldering iron to the solder, desoldersolder connecting the positive (red) wire.
[* black] Pull back on
the wire and pullwith the iron in place, removing it away from the motherboardhot solder.
[* black] Repeat the same stepsthis step for blackthe negative wire.
[* icon_note] The solder will be melted almost instantly. There is no need to hold the iron on the solder for than a second or two. Visit [guide|750|IFixit Solder Guideguide|750|IFixit's soldering guide] for more informationinfo.
[* icon_caution] Solder is very hot andThe soldering iron can destroy yourcomponents on the motherboard.
[* red] This hole indicated by red rectangle is connecting
Only touch the soldering iron to the red speaker wiresolder already on the board.
[* black] Touch the tip of yourthe soldering iron to the solder, desoldersolder connecting the positive (red) wire.
[* black] Pull back on
the wire and pullwith the iron in place, removing it away from the motherboardhot solder.
[* black] Repeat the same stepsthis step for blackthe negative wire.
[* icon_note] The solder will be melted almost instantly. There is no need to hold the iron on the solder for than a second or two. Visit [guide|750|IFixit Solder Guideguide|750|IFixit's soldering guide] for more informationinfo.

Imagem 1

Versão Antiga

Nova Versão