Ir para o conteúdo principal

Alterações no passo #5

Edição por Ron Davis

Edição aprovada por Ron Davis

Antes
Depois
Sem alteração

Linhas de Passo

[* red] Disconnect the ribbon cable by liftingLift the brown plastic latch above iton the ZIF connector securing the driver board ribbon cable.
[* black] Pull the ribbon cable from its connector
. The plate and board should now be free from the Echo.
[* red] Disconnect the ribbon cable by liftingLift the brown plastic latch above iton the ZIF connector securing the driver board ribbon cable.
[* black] Pull the ribbon cable from its connector
. The plate and board should now be free from the Echo.