Ir para o conteúdo principal

Alterações no passo #3

Edição por Patrick Zhang

Edição aprovada por Patrick Zhang

Antes
Depois
Sem alteração

Linhas de Passo

[* black] UseOnce you applied the iOpener on the device, use a metal spudger to pry the screen free.
[* icon_note] The screen is held with adhesive, so use the iOpener to apply pressureheat to make releasing the screen easierdevice.
[* black] UseOnce you applied the iOpener on the device, use a metal spudger to pry the screen free.
[* icon_note] The screen is held with adhesive, so use the iOpener to apply pressureheat to make releasing the screen easierdevice.
[* icon_caution] Be careful with sharp edges
[* black] Once the broken screen is set free, replace it with the screen replacement.