Ir para o conteúdo principal

Alterações no passo #3

Edição por Kelsea Weber

Edição aprovada por Kelsea Weber

Antes
Depois
Sem alteração

Linhas de Passo

[* icon_note] The screen is held with adhesive, so use the iOpener to apply heat to the device.
[* black] Once you applied the iOpener on the device, use the plastic opening tool and metal spudgeror opening pick to pry the screen free.
[* icon_caution] When working with electronics, it's important to use ESD-safe tools to avoid accidental damage to the device. The regular black nylon spudger or a plastic opening tool should be used whenever possible. AlsoAlso, beware of sharp edgesedges on a broken screen.
[* black] Once you applied the iOpener on the device, use the plastic opening tool and metal spudgeror opening pick to pry the screen free.
[* icon_caution] When working with electronics, it's important to use ESD-safe tools to avoid accidental damage to the device. The regular black nylon spudger or a plastic opening tool should be used whenever possible. AlsoAlso, beware of sharp edgesedges on a broken screen.
[* black] Once the broken screen has been set free, put in the screen replacement.