Ir para o conteúdo principal

Alterações no passo #3

Edição por Patrick Zhang

Edição aprovada por Patrick Zhang

Antes
Depois
Sem alteração

Linhas de Passo

[* icon_note] The screen is held with adhesive, so use the iOpener to apply heat to the device.
[* black] Once you applied the iOpener on the device, use a metal spudger to pry the screen free.
[* icon_note] The screen is held with adhesive, so use the iOpener to apply heat to the device.
[*
icon_caution] Be careful withBeware of sharp edges
[* black] Once the broken screen ishas been set free, replace it withput in the screen replacement.
[* icon_note] The screen is held with adhesive, so use the iOpener to apply heat to the device.
[*
icon_caution] Be careful withBeware of sharp edges
[* black] Once the broken screen ishas been set free, replace it withput in the screen replacement.