Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Peças e ferramentas

Alterações no passo #2

Edição por James Copeland

Edição aprovada de James Copeland

Antes
Depois
Sem alteração

Linhas de Passo

[* black] Heat theA heat gun or an iOpener in a microwave for thirty seconds. Throughout the repair procedure,must be used as the iOpener cools, reheat it in the microwave for an additional thirty seconds at a time.
[* icon_caution] The iOpener will be very hot, so be careful when handling it. Remove the iOpener from the microwave by holding the flat ends
heating tool. This [guide|11677|guide] explains how to avoiduse the hot centeriOpener.
[* black] LayEvenly apply heat to the iOpener over the front edges of the phonetouchscreen to loosen the adhesive securing the touchscreen, periodically adjusting the position of the iOpeneradhesive. Continue to evenly heatStep 3 once the adhesive.
[* black] Alternatively, a heat gun may be used in place
edge of the iOpener. Apply heatscreen is warm to the edges of the touchscreen by continuously moving a heat gun in a rectangular path along the edges of the screentouch.
[* black] Heat theA heat gun or an iOpener in a microwave for thirty seconds. Throughout the repair procedure,must be used as the iOpener cools, reheat it in the microwave for an additional thirty seconds at a time.
[* icon_caution] The iOpener will be very hot, so be careful when handling it. Remove the iOpener from the microwave by holding the flat ends
heating tool. This [guide|11677|guide] explains how to avoiduse the hot centeriOpener.
[* black] LayEvenly apply heat to the iOpener over the front edges of the phonetouchscreen to loosen the adhesive securing the touchscreen, periodically adjusting the position of the iOpeneradhesive. Continue to evenly heatStep 3 once the adhesive.
[* black] Alternatively, a heat gun may be used in place
edge of the iOpener. Apply heatscreen is warm to the edges of the touchscreen by continuously moving a heat gun in a rectangular path along the edges of the screentouch.
[* icon_caution] Do not let the iOpener/heat gun remain on one spot too long. Excess heat can damage the phone.
[* icon_reminder] When reassembling the phone, the iOpener/heat gun must be used to help the adhesive fuse to the new screen. Heat the screen edges, apply pressure to the screen, and hold until the screen is firmly in place.