Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Peças e ferramentas

Alterações no passo #2

Edição por James Copeland

Edição aprovada de James Copeland

Antes
Depois
Sem alteração

Linhas de Passo

[* black] Let your heat gun warm up to a moderate setting.
[* black] Apply heat to the edges of the touchscreen by gentlycontinuously moving the heat gun in a rectangular path along the edges of the screen. This will loosen the adhesive.
[* icon_caution] Do not let the heat gun remain on one spot too long. Excess heat can damage the phone.
[* black] Apply heat to the edges of the touchscreen by gentlycontinuously moving the heat gun in a rectangular path along the edges of the screen. This will loosen the adhesive.
[* icon_caution] Do not let the heat gun remain on one spot too long. Excess heat can damage the phone.
[* black] As the adhesive loosens, use a plastic spudger to pry up an edge of the screen. Use a guitar pick to hold that edge in place and continue this process around the entire screen, applying heat as necessary.