Ir para o conteúdo principal

Alterações no passo #2

Edição por james

Edição aprovada por james

Antes
Depois
Sem alteração

Linhas de Passo

-[* black] Use the plastic opening tool from the iFixit toolkit to separate the back from the front of the device. This can be done by wedging the opening tool in the crack where the two sides of the device cover meet.
-[* black] After it is wedged in push down on the exposed end until the two sides come apart.
+[* black] Carefully pry the backing of the device, from front of the device. This can be done by wedging the opening tool in the crack where the two sides of the device cover meet.