Ir para o conteúdo principal

Alterações no passo #2

Edição por Kayla Garcia

Edição aprovada por Kayla Garcia

Antes
Depois
Sem alteração

Linhas de Passo

-[* black] Now that you have removed four screws from the device and stored them for safe keeping.
-[* black] Use the smaller flat head plastic opening tool from the iFixit toolkit and gently pry the back open. Until the back is completely separated from the rest of the device.
+[* black] Use the plastic opening tool from the iFixit toolkit to separate the back from the front of the device. This can be done by wedging the opening tool in the crack where the two sides of the device cover meet.
+[* black] After it is wedged in push down on the exposed end until the two sides come apart.