Ir para o conteúdo principal

Alterações no passo #1

Edição por james

Edição aprovada por james

Antes
Depois
Sem alteração

Linhas de Passo

-[* icon_note] Before starting the disassemble, make sure the device is powered off.
-[* black] Flip the device on its front to display the back of the device.
-[* red] Unscrew the 4 screws using the PH000 drill bit from the iFixit toolkit.
-[* icon_reminder] Don't forget to place the screws aside in a safe location, perhaps use a magnetic board to store them. You will need the screws to put the device back together.
+[* icon_note] Before starting, make sure the device is powered off.
+[* black] Flip the device on its front, to display the back of the device.
+[* red] Unscrew the 4 screws located on the back of the device, using a the PH000 screw driver.
+[* icon_reminder] Don't forget to place the screws aside in a safe location.