Ir para o conteúdo principal

Alterações no passo #1

Edição por Marty Rippens

Edição aprovada por Marty Rippens

Antes
Depois
Sem alteração

Linhas de Passo

[* icon_note] Before starting the disassemble, make sure the device is powered off.
-[* black] To remove the battery, you first must flip the device on its front to display the back of the device.
+[* black] Flip the device on its front to display the back of the device.
[* red] Unscrew the 4 screws using the PH000 drill bit from the iFixit toolkit.
[* icon_reminder] Don't forget to place the screws aside in a safe location, perhaps use a magnetic board to store them. You will need the screws to put the device back together.