Ir para o conteúdo principal

Alterações no passo #1

Edição por Anthasia Williams

Edição aprovada por Anthasia Williams

Sem alteração

Linhas de Passo

-[* black] Unscrew the 4 screws using the PH000 drill bit from the iFixit toolkit.
+[* black] To remove the battery, you first must flip the device on its front to display the back of the device.
+[* black] At this point you will notice a total of four screws at each corner of the device.
+[* black] Now take the PH000 drill bit from the iFixit toolkit and unscrew all four screws.
+[* black] Don't forget to place the screws aside in a safe location, perhaps use a magnetic board to store them. You will need the screws to put the device back together.

Imagem 1

Versão Antiga

Nova Versão