Ir para o conteúdo principal

Alterações no passo nº 1

Edição por David Hodson

Aguardando aprovação

Antes
Depois
Sem alteração

Linhas do passo

-[* red] On the side of the lower case opposite the stylus housing, remove the three 3.6 mm Phillips screws securing the battery shield.
-[* black] Lift the battery shield away from the lower case.
+[* red] Remove the three 3.6 mm Phillips screws securing the metal battery shield to the lower case.
+[* black] Lift the battery shield up and out of the lower case.