Pular para o conteúdo principal

Alterações no passo #1

Edição por Christopher Patton

Aguardando aprovação

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* black] After casing and keyboard have been taken off, remove the screws holding the screen in place using a T-6 for the screws in the middle of the red circles and a T-5 for the screw in the middle of the red sqauresquare.
[* black] After casing and keyboard have been taken off, remove the screws holding the screen in place using a T-6 for the screws in the middle of the red circles and a T-5 for the screw in the middle of the red sqauresquare.
[* black] Lift ribbon off of the contact with the logic board
[* black] *When reassembling, make sure to firmly press contacts into place to ensure a connection is made between ribbon and logic board