Conserte seus objetos Comunidade Loja

Alterações no passo nº 1

Edição por Alstein Einbert —

Edição recusada por Spencer Pennington

Antes
Depois
Sem alteração

Linhas do passo

[* red] Remove the nine 6.3 mm black JIS screws from the lower case.
-[* icon_caution] Apply constant, downward pressure to avoid stripping these screws. You can use a Phillips #00 screwdriver, but make sure the head is aligned correctly to avoid damaging the screw.
+[* icon_caution] To avoid stripping these screws, make sure you are using a JIS #00 screwdriver and ***not*** a PHILLIPS #00. You ''can'' use a PHILLIPS #00 with a lot of downwards pressure but be warned this ***will*** deform the screw head and you risk stripping it.
[* orange] Remove the 2.4 mm silver JIS screw above the game cartridge slot.