Conserte seus objetos Comunidade Loja

Alterações no passo nº 1

Edição por Alstein Einbert —

Edição aprovada por Spencer Day

Antes
Depois
Sem alteração

Linhas do passo

-[* red] Remove the nine 6.3 mm black Phillips screws from the lower case.
-[* icon_caution] These screws will strip very easily unless you use the correct size bit. Apply pressure to the screws while turning to avoid stripping them.
-[* orange] Remove the 2.4 mm silver Phillips screw above the game cartridge slot.
+[* red] Remove the nine 6.3 mm black JIS screws from the lower case.
+[* icon_caution] These screws will strip easly if you use a Phillips screwdriver. They are JIS not Phillips! If you don't want to buy a JIS #00 screwdriver, you can press very hard with a Phillips #00 screwdriver but this will mangle the screw and you risk stripping it!
+[* orange] Remove the 2.4 mm silver JIS screw above the game cartridge slot.