Conserte seus objetos Comunidade Loja

Alterações no passo nº 1

Edição por Alstein Einbert —

Edição aprovada por Spencer Day

Antes
Depois
Sem alteração

Linhas do passo

-[* red] Unscrew the four Phillips #00 screws along the top of the back cover.
+[* red] Unscrew the four JIS #00 screws along the top of the back cover.
[* icon_note] The screws are held in place by locking washers, and will not come out of the back cover.
-[* icon_caution] The comments section is full of unlucky souls who will tell you that the screws here through step 4 will strip incredibly easily. Press down fairly hard, and go slow.
+[* icon_caution] The comments section is full of unlucky souls who will tell you that the screws here through step 4 will strip, Phillips is not the same as JIS. If you dont want to buy a JIS Screwdriver, you can press down farely hard with a Phillips #00 screwdriver. Be warned that this will mangle the screw and you risk stripping it!