Alterações no passo nº 1
Edição por Spencer Pennington —
Edição aprovada por Spencer Pennington
- Antes
- Depois
- Sem alteração
Linhas do passo
| [* red] Use a Phillips PH00 screwdriver to loosen the four screws along the top of the back cover. | |
| - | [* icon_note] All screws in this device are [guide|93991|JIS screws|stepid=176809|new_window=true]. |
| + | [* icon_note] All screws in this device are [guide|93991|JIS screws|stepid=176809|new_window=true]. Official [product|IF145-006|iFixit PH000-PH1 Phillips screwdrivers|new_window=true] are designed to be compatible with JIS screws, so they are safe to use. Using a screwdriver other than an official iFixit screwdriver or a JIS screwdriver may result in [guide|13213|stripped screws|new_window=true]. |
| [* icon_note] The screws are held in place by locking washers, and will not come out of the back cover. |