Conserte seus objetos Comunidade Loja

Alterações no passo nº 1

Edição por Alstein Einbert —

Edição recusada por Clay Eickemeyer

Antes
Depois
Sem alteração

Linhas do passo

-[* red] Use a Phillips PH00 screwdriver to loosen the four screws along the top of the back cover.
-[* icon_note] All screws in this device are [guide|93991|JIS screws|stepid=176809|new_window=true]. All official [product|IF145-006|iFixit Phillips screwdrivers|new_window=true] are designed to be compatible with JIS screws, so they are safe to use. Using a screwdriver other than an official iFixit screwdriver or a JIS screwdriver may result in [guide|13213|stripped screws|new_window=true].
-[* icon_note] The screws are held in place by locking washers, and will not come out of the back cover.
+[* red] Use a JIS #00 screwdriver to loosen the four screws along the top of the back cover.
+[* icon_caution] JIS (Japanese Industrial Standards) screws are ***not*** the same as Phillips. To avoid stripping these screws, make sure you are using a JIS #00 screwdriver and not a PHILLIPS #00 screwdriver. You ''can'' use a PHILLIPS #00 with a lot of downwards force but be warned this ***will*** deform the screw head and you risk stripping it.
+[* icon_note] IFixIt's Phillips head screwdriver is desinged to reduce damage on JIS head screws so it should be fine to use, still apply more force. Make sure it's IFixIt's official Phillips screwdriver as we are unaware of any other manufacturer who does this.