Conserte seus objetos Comunidade Loja

Alterações no passo nº 1

Edição por Alstein Einbert —

Edição recusada por Clay Eickemeyer

Antes
Depois
Sem alteração

Linhas do passo

-[* red] Use a Phillips PH00 screwdriver to loosen the four screws along the top of the back cover.
-[* icon_note] All screws in this device are [guide|93991|JIS screws|stepid=176809|new_window=true]. All official [product|IF145-006|iFixit Phillips screwdrivers|new_window=true] are designed to be compatible with JIS screws, so they are safe to use. Using a screwdriver other than an official iFixit screwdriver or a JIS screwdriver may result in [guide|13213|stripped screws|new_window=true].
+[* red] Use a JIS #00 screwdriver to loosen the four screws along the top of the back cover.
+[* icon_caution] JIS (Japanese Industrial Standards) screws are ***not*** the same as Phillips. To avoid stripping these screws, make sure you are using a JIS #00 screwdriver and not a PHILLIPS #00 screwdriver. You ''can'' use a PHILLIPS #00 with a lot of downwards force but be warned this ***will*** deform the screw head and you risk stripping it.
[* icon_note] The screws are held in place by locking washers, and will not come out of the back cover.