Conserte seus objetos Comunidade Loja

Alterações no passo nº 1

Edição por Alstein Einbert —

Edição recusada por Spencer Pennington

Antes
Depois
Sem alteração

Linhas do passo

[* red] Unscrew the four JIS #00 screws along the top of the back cover.
[* icon_note] The screws are held in place by locking washers, and will not come out of the back cover.
-[* icon_caution] Apply constant, downward pressure to avoid stripping these screws. You can use a Phillips #00 screwdriver, but make sure the head is aligned correctly to avoid damaging the screw.
+[* icon_caution] To avoid stripping these screws, make sure you are using a JIS #00 screwdriver and ***not*** a PHILLIPS #00. You ''can'' use a PHILLIPS #00 with a lot of downwards pressure but be warned this ***will*** deform the screw head and you risk stripping it.