Conserte seus objetos Comunidade Loja

Alterações no passo nº 5

Edição por Allyson Korinsky —

Edição aprovada por Allyson Korinsky

Antes
Depois
Sem alteração

Linhas do passo

-[* icon_note] For this step we are making the same knot that we did in step 3, but in the opposite direction. This knot will be used for the strings: A, D and (high) E ***only***.
-[* black] Insert the Springy end of the string into the hole in the tuning peg.
+[* icon_note] Repeat step 4 (outlined below) for ***only*** the strings A, D, and high E .
+[* black] Insert the springy end of the string into the hole in the tuning peg.
[* black] Pull the springy end over the tuning peg to the right side.
-[* black] Bring the Springy end to the left side by passing it under the string. This creates a Loop.
-[* black] Push the Springy end through the Loop and then pull both ends until the knot is tight. You may have to press your finger down on the knot to get it completely tight.
+[* black] Bring the springy end to the left side by passing it under the string., creating a loop.
+[* black] Push the springy end through the loop and then pull both ends until the knot is tight. You may have to press your finger down on the knot to get it completely tight.