Histórico do passo nº 4 do guia Guitar String Replacement

Alterações no passo nº 4

Edição por Nicholas Mullins — 1 de fev de 2016

	[* icon_note] This knot will be used for the (low) E, G and B strings *only*.
	[* black] Insert the Springy end of the string into the hole in the tuning peg.
-	[* black] Pull the Springy end *over* the tuning peg to the left side.
+	[* black] Pull the Springy end *over* the tuning peg and to the left side.
	[* black] Bring the Springy end to the right side by passing it under the string. This creates a Loop.
	[* black] Push the Springy end through the Loop and then pull both ends until the knot is tight. You may have to press your finger down on the knot to get it completely tight.