Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Alterações no passo #1

Edição por Jasper Jonkman

Edição aprovada por Jasper Jonkman

Antes
Depois
Sem alteração

Linhas de Passo

[* red] Using a Torx T6 Screwdriver, remove the indicated screws. There are 2 more in the top corners and at 2 bottom (not indicated in the picture). So a total of 6 scews are removed in this step.
[* red] Using a Torx T6 Screwdriver, remove the indicated screws. There are 2 more in the top corners and at 2 bottom (not indicated in the picture). So a total of 6 scews are removed in this step.
[* black] Using a plastic opening tool, gently pry the Logic Board Components from the device's frame.
[* black] Once loose enough the Logic Board can be removed.