Conserte seus objetos

Direito de executar reparos

Loja

Alterações no passo #1

Edição por Angela Penaherrera —

Edição aprovada por Angela Penaherrera

Antes
Depois
Sem alteração

Linhas de Passo

[* red] Using a Torx T6 Screwdriver, remove the 4 indicated screws.
[* red] There are 2 more inscrews at the top corners and at 2 bottom (not indicated in the picture). So a total of 6 scews are removed in this step.
[* black] Usingholding a small plastic opening tool, gently pry the Logic Board Components from the device's frame.
[* black] Once loose enough the Logic Board can be removedtab. Remove them too.
[* red] Using a Torx T6 Screwdriver, remove the 4 indicated screws.
[* red] There are 2 more inscrews at the top corners and at 2 bottom (not indicated in the picture). So a total of 6 scews are removed in this step.
[* black] Usingholding a small plastic opening tool, gently pry the Logic Board Components from the device's frame.
[* black] Once loose enough the Logic Board can be removedtab. Remove them too.

Imagem 1

Versão Antiga

Nova Versão

Imagem 2

Versão Antiga

Nova Versão

Imagem 3

Excluído