Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Alterações no passo #2

Edição por Justin Cogan

Edição aprovada de Justin Cogan

Antes
Depois
Sem alteração

Linhas de Passo

[* icon_cautionred] With the screw removed, separate the two pieces of the hood by lifting the top piece vertically as shown.it vertically.
[* icon_caution]
'''Only lift the the top piece enough so that there is no tension applied to the ribbon cables shown.'''
[* black] Theorange] Carefully pull down the white ribbon cable is attached only to onethrough the top piece of the hood, so simply pull it through(downward) the non-attached end as shownhood.
[* icon_cautionred] With the screw removed, separate the two pieces of the hood by lifting the top piece vertically as shown.it vertically.
[* icon_caution]
'''Only lift the the top piece enough so that there is no tension applied to the ribbon cables shown.'''
[* black] Theorange] Carefully pull down the white ribbon cable is attached only to onethrough the top piece of the hood, so simply pull it through(downward) the non-attached end as shownhood.

Imagem 1

Versão Antiga

Nova Versão

Imagem 2

Versão Antiga

Nova Versão