Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Alterações no passo #1

Edição por Marshall in Baltimore

Aguardando aprovação

Antes
Depois
Sem alteração

Linhas de Passo

[* black] Use the edge of a plastic opening tool to carefully flip up the retaining flaps on the two digitizer ribbon cable ZIF sockets.
[* icon_caution] Be sure you are prying up on the hinged retaining flaps, '''not''' the sockets themselves. Pry from the side closest to the edge of the iPad, so that the hinged flaps flip up towards the ribbon cable.
[* icon_caution] Be sure you are prying up on the hinged retaining flaps, '''not''' the sockets themselves. Pry from the side closest to the edge of the iPad, so that the hinged flaps flip up towards the ribbon cable.
[* icon_note] The retaining flaps are highlighted in red in the second picture.
[* black] It may help to first remove the small metal retaining clip held in by two screws, right at the corner of the iPad. This provides easier access to flip up the second retaining flap.