Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Peças e ferramentas

Alterações no passo #2

Edição por Tom Green

Edição aprovada de Andrew Optimus Goldheart

Antes
Depois
Sem alteração

Linhas de Passo

[* black] Disconnect the two newly-revealed temperature sensor connectors and the fan connector from the logic board. These connectors move up, not towards the rear of the case, and can be lifted with gentle pressure from under the cable.
[* black] Disconnect the two newly-revealed temperature sensor connectors and the fan connector from the logic board. These connectors move up, not towards the rear of the case, and can be lifted with gentle pressure from under the cable.
[* icon_note] On Santa Rosa/Penryn models, there is only one temperature sensor connector containing all four leads. See second picture.

Imagem 2

Versão Antiga

Nova Versão