Menu

Suas configurações

Alterações no passo #6

Edição por Dan —

Aguardando aprovação

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* black] Disconnect the three antenna cables from the Airport card, andcard.
[* black] Disconnect the black inverter cable from the logic board.
[* icon_note]socket by inserting the spudger between the right or left edge of the plug and the socket, and prying gently upward. The inverter cable connector may be covered by a small pieceplug lifts vertically off of foam tape. Remove this cube before disconnecting the connectorcircuit board. Do not pull it in the direction of the connecting wires or you will tear the socket off.
[* black] Disconnect the three antenna cables from the Airport card, andcard.
[* black] Disconnect the black inverter cable from the logic board.
[* icon_note]socket by inserting the spudger between the right or left edge of the plug and the socket, and prying gently upward. The inverter cable connector may be covered by a small pieceplug lifts vertically off of foam tape. Remove this cube before disconnecting the connectorcircuit board. Do not pull it in the direction of the connecting wires or you will tear the socket off.
[* icon_note] If you have a MacBook Core 2 Duo Santa Rosa/Penryn, there are only two antenna cables and the black inverter cable is in a different location.