Skip to main content

Alterações no passo #1

Edição por Naveen Krishan

Aguardando aprovação

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* yellowicon_note] After having removed the hood removed and disassembled it, nowdisassembled, locate the scanner.
[* yellow] IfAdjust the scanner does not appear as it is pictured, move it sosuch that it is flush withits track fits into the chassis(the part of the printer's hood supporting the scanner)slotted path as shown in yellow.
[* yellowicon_note] After having removed the hood removed and disassembled it, nowdisassembled, locate the scanner.
[* yellow] IfAdjust the scanner does not appear as it is pictured, move it sosuch that it is flush withits track fits into the chassis(the part of the printer's hood supporting the scanner)slotted path as shown in yellow.
[* red] If the black ribbon cable is twisted, untwist it so it appears as shown.