Ir para o conteúdo principal

Alterações no passo #2

Edição por Kristen Gismondi

Edição aprovada por Kristen Gismondi

Antes
Depois
Sem alteração

Linhas de Passo

-[* black] Disconnect the ribbon cable from the logic board. Note the cable is twisted around the monitor hinge, so do not pull up.
-[* icon_caution] Unravel the cable from the hinge first
+[* black] Disconnect the ribbon cable from the logic board.
+[* icon_caution] Potential for device damage: The cable is twisted around the monitor hinge, so do not pull up. Unravel the cable from the hinge first.