Ir para o conteúdo principal

Alterações no passo #2

Edição por Frederick

Edição aprovada por Frederick

Antes
Depois
Sem alteração

Linhas de Passo

-[* black] The ribbon cable should be disconnected from the logic board. Note the cable is twisted around the monitor hinge, so do not pull up. Make sure to unravel the cable from the hinge first.
+[* black] Disconnect the ribbon cable from the logic board. Note the cable is twisted around the monitor hinge, so do not pull up.
+[* icon_caution] Unravel the cable from the hinge first