Ir para o conteúdo principal

Alterações no passo #2

Edição por Frederick

Edição aprovada por Frederick

Antes
Depois
Sem alteração

Linhas de Passo

-[* black] Disconnect the ribbon cable from the logic board by pulling it up and out of its connector. Note that the cable is twisted around the monitor hinge, so do not pull straight up. Make sure to unravel the cable from the hinge first.
+[* black] The ribbon cable should be disconnected from the logic board. Note the cable is twisted around the monitor hinge, so do not pull up. Make sure to unravel the cable from the hinge first.