Ir para o conteúdo principal

Alterações no passo #2

Edição por Alex Wineteer

Aguardando aprovação

Antes
Depois
Sem alteração

Linhas de Passo

-[* black] Disconnect the ribbon cable. Note that the cable is twisted around the monitor hinge, so do not pull straight up. Make sure to unravel the cable from the hinge first.
+[* black] Disconnect the ribbon cable from the logic board by pulling it up and out of its connector. Note that the cable is twisted around the monitor hinge, so do not pull straight up. Make sure to unravel the cable from the hinge first.