Ir para o conteúdo principal

Alterações no passo #8

Edição por Evan Noronha

Edição aprovada por Evan Noronha

Antes
Depois
Sem alteração

Linhas de Passo

[* black] Up next, the rear camera module.
[* black] Hopefully this unit could be upgraded in later years, à la [https://en.wikipedia.org/wiki/Project_Ara|Project Ara]. Fingers crossed.
-[* black] The camera itself is an 8 megapixel CMOS camera with a 1/3.2 inch sensor and an aperture of ƒ2.2.
+[* black] The camera itself is an 8 megapixel CMOS camera with a 1/3.2 inch sensor and an aperture of ƒ/2.2.
[* black] This module is built just like the others: a plastic case around an off-the-shelf component, connected to a pogo interface board via flex cable and connector.
[* icon_note] Fairphone hasn't quite removed cables or connectors, they have moved them a bit farther from DIY fixers—greatly simplifying component swap repairs.