Ir para o conteúdo principal

Alterações no passo #8

Edição por Tobias Isakeit

Edição aprovada por Tobias Isakeit

Antes
Depois
Sem alteração

Linhas de Passo

-[* black] Next we go for the internals of the camera module. Again, just with a Torx T5.
-[* black] The camera itself is connected to the small board with a plug and held in place with a soft double sided adhesive inside the plastic housing.
+[* black] Next we go for the internals of the camera module. Again, just with the Torx.
+[* black] The camera itself is an 8 megapixel CMOS camera with a 1/3.2 inch sensor and an aperture of f2.2.
+[* black] It is plugged into the pogo board with a simple connector and held in place with a soft double sided adhesive inside the plastic housing.