Ir para o conteúdo principal

Alterações no passo #8

Edição por Tobias Isakeit

Edição aprovada por Tobias Isakeit

Antes
Depois
Sem alteração

Linhas de Passo

[* black] Next we go for the internals of the camera module. Again, just with the Torx.
-[* black] The camera itself is an 8 megapixel CMOS camera with a 1/3.2 inch sensor and an aperture of f2.2.
-[* black] It is plugged into the pogo board with a simple connector and held in place with a soft double sided adhesive inside the plastic housing.
+[* black] The camera itself is an 8 megapixel CMOS camera with a 1/3.2 inch sensor and an aperture of f 2.2.
+[* black] It is plugged into the pogo board with a simple connector and held in place with a soft double sided adhesive tape inside the plastic housing.

Imagem 1

Versão Antiga

Nova Versão

Imagem 2

Versão Antiga

Nova Versão

Imagem 3

Excluído