Alterações no passo nº 3
Edição por James Herin —
Edição aprovada por James Herin
- Antes
- Depois
- Sem alteração
Linhas do passo
| - | [* black] Remove spade connectors from the switch by pulling only on the connector, not the wire. These should come off without tools, but will require a fair bit of force. Mark each wire with tape if you are unsure of the wiring layout of the device. |
|---|---|
| + | [* black] Remove the spade connectors from the switch by pulling only on the connector, not the wire. These should come off without tools, but will require a fair bit of force. Mark each wire with tape if you are unsure of the wiring layout of the device. |