Ir para o conteúdo principal

Alterações no passo #4

Edição por Kelsea

Edição aprovada por Kelsea

Antes
Depois
Sem alteração

Linhas de Passo

-[* black] Time to bust into this unibody badboy! Like the Nexus 6, there are no visible screws on the rear cover. We spot a vulnerable seam to the thin bottom panel and start our screw hunt there.
-[* black] We're assuming adhesive lies beneath this dainty panel, so we add some heat and use an opening pick to pry the little guy loose.
-[* black] With a careful slide of the opening pick we easily? remove the bottom plastic panel. First signs of adhesive or no?
+[* black] Time to bust into this unibody badboy! Like the Nexus 6, there are no visible screws on the rear cover, but we spot a vulnerable seam to the thin bottom panel and start our screw hunt there.
+[* black] We're assuming adhesive lies beneath this dainty panel, so we add some heat and try using an opening pick to pry the little guy loose.
+[* black] Alas, we have our first signs of adhesive. With a careful slide of the opening pick we easily? remove the bottom plastic panel.
[* black] Voila! The screws have appeared, accompanied by our favorite tamper evident screw stickers, boo.
[* black] Let's say bye bye to our warranty, hello to the first four screws and move on to yet another dainty panel to see what lies beneath.