Ir para o conteúdo principal

Alterações no passo #4

Edição por Kelsea

Edição aprovada por Kelsea

Antes
Depois
Sem alteração

Linhas de Passo

[* black] Time to bust into this unibody badboy! Like the Nexus 6, there are no visible screws on the rear cover. We spot a vulnerable seam to the thin bottom panel and start our screw hunt there.
-[* black] We're assuming adhesive lies beneath this dainty panel, so we decide to add some heat and use an opening pick to pry the little guy loose.
+[* black] We're assuming adhesive lies beneath this dainty panel, so we add some heat and use an opening pick to pry the little guy loose.
[* black] With a careful slide of the opening pick we easily? remove the bottom panel. adhesive or no?
[* black] Voila! The screws have appeared, accompanied by our favorite tamper evident screw stickers, boo.
-[* black] Let's say Bye Bye to our warranty and Hello to the four Xmm Phillips Screws. ( type?)
+[* black] Let's say bye bye to our warranty, hello to four Xmm Phillips screws and see what lies beneath.