Ir para o conteúdo principal

Alterações no passo #4

Edição por Kelsea

Edição aprovada por Kelsea

Antes
Depois
Sem alteração

Linhas de Passo

-[* black] Time to bust into this unibody badboy! The thin bottom panel looks tempting, let's start the screw hunt there.
+[* black] Time to bust into this unibody badboy! Like the Nexus 6, there are no visible screws on the rear cover. We spot the seam to a thin bottom panel and start our screw hunt there.
[* black] We're assuming adhesive lies beneath and decide to add some heat.
-[* black] The bottom panel seems dainty so we'll use an opening pick to pry it loose. Voila! The screws have appeared, accompanied by tamper evident screw stickers, boo.
+[* black] The bottom panel seems dainty so we'll use an opening pick to carefully pry it loose.
+[* black] With a careful slide with the opening pick we easily remove the bottom panel. glue? no glue?
+[* black] Voila! The screws have appeared, accompanied by tamper evident screw stickers, boo.
+[* black] Let's say Bye Bye to our warranty and Hello to the four Xmm Phillips Screws. ( type?)