Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Alterações no passo #8

Edição por johnsawyercjs

Edição aprovada de Jake Devincenzi

Antes
Depois
Sem alteração

Linhas de Passo

[* yellow] While holding up the upper case, pull up the black tab of the silver cable away from its connector.
[* icon_note] If there is no black tab, you can also use a spudger to gently pry the connector from its housing. This connector is tall, so be sure to pry straight up.
[* icon_note] If you happen to break your upper case cable when removing the upper case, we stock the [product|IF186-092|cable] individually and we have a [guide|4660|guide] that makes replacing it easy.
[* icon_note] Upon reassembly, there are 4 grey plastic clips on the optical drive side of the keyboardkeyboard (refer to picture). They must be installed in their slots for the keyboard to snap in properly.
[* icon_note] Upon reassembly, there are 4 grey plastic clips on the optical drive side of the keyboardkeyboard (refer to picture). They must be installed in their slots for the keyboard to snap in properly.

Imagem 2

Nenhuma imagem anterior

Adicionado